MATERIAL SAFETY DATA SHEET
Sodium stearoyl lactylate-SSL MSDS
- Company Identification
Supplier: Newseed Chemical Co., Limited.
Add: Mingsheng Road, Shanghai, China
Revision date: 2018.01.23
- COMPOSITION/INFORMATION INGREDIENTS
Product name: Sodium Stearoyl Lactylate
Cas #: 25383-99-7
RTECS: Not available.
TSCA: TSCA 8(b) inventory: Sodium Stearoyl Lactylate
CI#: Not available.
Synonym: Octadecanoic Acid, 2-(carboxyethoxy)-1-methyl-2-oxothyl ester, sodium salt
Chemical Name: Sodium Stearoyl Lactylate
Chemical Formula: C24-H43-O-6-Na
- HAZARDS IDENTIFICATION
Potential Acute Health Effects:
Hazardous in case of eye contact (irritant), of inhalation. Slightly hazardous in case of skin contact (irritant), of ingestion.
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure is not known to aggravate medical condition.
- FIRST-AID MEASURES
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. WARM water MUST be used. Get medical attention.
Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.
Serious skin Contact: Not available.
Inhalation: if inhaled,remove to fresh air. If not breathing,give artificial respiration, If breathing is difficult, give oxygen. Get medical attention.
Serious skin Contact: Not available.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband.
- FIRE-FIGHTING MEASURES
Flammability of the Product: May be combustible at high temperature.
Auto-Ignition Temperature: Not available.
Flash Points: CLOSED CUP: 221.11°C (430°F).
Flammable Limits: Not available.
Products of Combustion: These products are carbon oxides (CO, CO2).
Fire Hazards in Presence of Various Substances: Slightly flammable to flammable in presence of heat.
Explosion Hazards in Presence of Various Substances
Fire fighing media and instruction
Small fire:use dry chemical powder.
Large fire:use water spray,fog or foam. Do not use water jet.
Specail remarks on fire hazards:not available.
Specail remarks on exposion hazards:not available.
- ACCIDENTAL RELEASE MEASURES
Small Spill：Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
7.HANDLING AND STORAGE
Precautions: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not breathe dust. Avoid contact with eyes. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention and show the label when possible.
Storage：HYGROSCOPIC. Keep container tightly closed. Keep container in a cool,well-ventilated area.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below exposure limit.
Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
- PHYSICAL AND CHEMICAL PROPERTIES
Physical state and appearance: Solid. (Solid powder.)
Odor: Sweetish. (Slight.)
Taste: Not available.
Molecular Weight: 451.6 g/mole
pH (1% soln/water): Not available.
Boiling Point: Not available.
Melting Point: 48.889°C (120°F)
10.STABILITY AND REACTIVITY
Stability: The product is stable.
Instability Temperature: Not available.
Conditions of Instability: Not available.
Incompatibility with various substances: Reactive with moisture.
Corrosivity: Not available.
Special Remarks on Reactivity: Hygroscopic
Special Remarks on Corrosivity: Not available.
Polymerization: Will not occur.
Chronic effects on humans: not available
Other Toxic Effects on Humans: not available
Hazardous in case of inhalation.
Slightly hazardous in case of skin contact (irritant), of ingestion.
- TOXICOLOGICAL INFORMATION
Eye or skin contact may cause mild transient irritation.
No toxic effects are known under normal conditions from inhalation of dust or vapours from this product.
- ECOLOGICAL INFORMATION
SSL is believed not to be dangerous to the environment with respect to mobility, persistency and degradability, bioaccumulative potential, aquatic toxicity and other data relating to ecotoxicity.
- DISPOSAL CONSIDERATIONS
Small quantities of waste are disposed of as domestic refuse.
Greater quantities are disposed of in accordance with the local regulations.
- TRANSPORT INFORMATION
SSL is not considered dangerous according to ADR, RID, IMO and IATA.
- REGULATORY INFORMATION
Federal and State Regulations: TSCA 8(b) inventory: Sodium Stearoyl Lactylate
Other Regulations: EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.
WHMIS (Canada): Not controlled under WHMIS (Canada)
16. OTHER INFORMATION
The information in Sodium stearoyl lactylate MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in Sodium stearoyl lactylate MSDS. The user should review these regulations to ensure full compliance.